Grip Studs #1800 30pk w/ Washers
We heard you and are now offering Grip Stud 1800's in a convenient 30 pack. We are also including the washers that many have found reduce deflection of the stud over time. You would also need to purchase the install tool to complete the installation.
Secure your footing on slimy weed covered rocks and in heavy surf with Grip Studs high-performance boot studs. These durable traction studs with their unique wide-auger shank do not bend, back-out or fold over in the sole like other narrow-threaded studs. Grip Studs feature a tough, solid tungsten carbide core-to-tip shaft and a rust-resistant finish, making them the perfect stud for rockhoppers! The unique installation notches of the Grip Studs design ensure easy installation and removal with the handy power tool. Grip Studs surf fishing studs work in almost any rubber or felt sole and are available in both aggressive and standard sizes ensuring compatibility with your boot sole and optimizing traction based on your surf fishing conditions. Stud size is 9x23.3mm. Stud penetration is 16.5mm leaving 6.8mm of exposed stud from your boot.
Installation Instructions: Always check boot sole depth before installing Grip Studs. Grip Studs boot studs can be installed with the Grip Studs power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against the boot sole. Steadily apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the surface of the sole. Remove the tool from the stud. The notched collar on the stud should be flush with the boot sole. Studs may come out if they are not adequately sunk into the sole. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces.