x
Grip Studs #1800 Bulk 100 Pack

Grip Studs #1800 Bulk 100 Pack

Regular price $119.95 Sale Availbility: IN STOCK

Secure your footing on slimy weed covered rocks and in heavy surf with Grip Studs high performance boot studs. These durable traction studs with their unique wide-auger shank do not bend, back-out or fold over in the sole like other narrow-threaded studs. Grip Studs feature a tough, solid tungsten carbide core-to-tip shaft and a rust-resistant finish, making them the perfect stud for rock hoppers! The unique installation notches of the Grip Studs design ensure easy installation and removal with the handy power tool. Grip Studs surf fishing studs work in almost any rubber or felt sole and are available in both aggressive and standard sizes ensuring compatibility with your boot sole and optimizing traction based on your surf fishing conditions. Stud size is 9x23.3mm. Stud penetration is 16.5mm leaving 6.8mm of exposed stud from your boot.

Installation Instructions:Always check boot sole depth before installing Grip Studs. Grip Studs boot studs can be installed with the Grip Studs power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against the boot sole. Steadily apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the surface of the sole. Remove the tool from the stud. The notched collar on the stud should be flush with the boot sole. Studs may come out if they are not adequately sunk into the sole. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces. Please note: Does not include install tool.
Secure your footing on slimy weed covered rocks and in heavy surf with Grip Studs high performance boot studs. These durable traction studs with their unique wide-auger shank do not bend, back-out or fold over in the sole like other narrow-threaded studs. Grip Studs feature a tough, solid tungsten carbide core-to-tip shaft and a rust-resistant finish, making them the perfect stud for rock hoppers! The unique installation notches of the Grip Studs design ensure easy installation and removal with the handy power tool. Grip Studs surf fishing studs work in almost any rubber or felt sole and are available in both aggressive and standard sizes ensuring compatibility with your boot sole and optimizing traction based on your surf fishing conditions. Stud size is 9x23.3mm. Stud penetration is 16.5mm leaving 6.8mm of exposed stud from your boot.

Installation Instructions:Always check boot sole depth before installing Grip Studs. Grip Studs boot studs can be installed with the Grip Studs power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against the boot sole. Steadily apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the surface of the sole. Remove the tool from the stud. The notched collar on the stud should be flush with the boot sole. Studs may come out if they are not adequately sunk into the sole. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces. Please note: Does not include install tool.

Shipping Costs

Shipping costs are determined by the size and dimensions of your order as well as your location. Just need something small? Maybe a lure or two? Your shipping charge could be VERY low - even under $3 for a single plug or other small item. You'll have options from least expensive to the very fastest for when your order just can't wait. Keep in mind many around New England, New York, and New Jersey will receive orders within 2 days even with our least expensive shipping.

Rod Shipping Charges

Most rods due to their size and packaging requirements will incur an additional "Oversize Shipping" charge of $9.99 to cover the expense of the rugged shipping tube needed to safely get your new fishing rod to you. Free shipping still applies. Some rods do not require the Oversize Shipping surcharge.

How soon will my order ship?

We know you can't wait to get out on the water. Almost any order placed before 3pm (and often as late as 4 or 5pm) will ship same day.

Free USPS Shipping offered on most orders over $100 within the United States

The Saltwater Edge offers free United States Postal Service shipping on orders over $100 (excluding some oversize items).  Rods incur an oversize packaging charge but most over $100 qualify for free shipping otherwise. A valid street address is required for all deliveries.

USPS Shipping Options

We offer First Class Mail, First Class Package, Priority Mail, and Prioirty Mail Express via United States Parcel Service.

UPS Shipping Options

The Saltwater Edge features UPS shipping options of Ground, 3-Day Select, 2nd Day Air, and Next Day Air.

International Shipping

The Saltwater Edge ships via USPS Priority International.  A street address is required for all deliveries. International shipping prices are quoted in U.S. dollars and must be prepaid in U.S. funds. Duties and taxes, if imposed on your order, are due at time of delivery (these charges are not calculated during checkout and are not collected by The Saltwater Edge). Please consult your local customs office for more details about duties and taxes.

RETURNS AND EXCHANGES ARE EASY!

The Saltwater Edge will accept returns on most products within 30 days. The item MUST be unused and in NEW condition with original manufacturer tags and stickers. Please call to set up returns before returning the merchandise.

BEYOND 30 DAYS?

If you're outside 30 days and wish to make an exchange, feel free to give us a call and we can see what we can do to help. We can not accept returns after 30 days without prior approval.

STILL HAVE QUESTIONS?

If you have additional questions, please email us or call us 866-793-6733 and we'll be glad to help.